Cat No: M0113
UPC No: 810025411848
The PTS Pair Tracing System comprises the PTS200 Tone Generator and the PTS100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs.
PTS200 Tone Generator
The PTS200 may be connected via the modular plug or the crocodile clips to the pair under test. Depending on the switch position the Tone Generator will test Polarity continuity or short circuits. The PTS200 can be used on twisted pair wiring (Telecom, Datacom, security / alarm, audio and electrical), single conductors, coaxial cables, de-energized AC wiring and just about any other wiring you can think of.
PTS100 Probe
The PTS100 Probe has a built-in loudspeaker to make it easy to hear the tracing signals and a near/far sensitivity adjustment to allow both broad searches and pinpoint identification of wires. To operate just press the button on the top and adjust the sensitivity control to hear the tone.
Related Products
Key Features
• Fast, Accurate Wire Identification
• Sends Tone to Identify Wires
• Polarity Indication
• Continuity Test
• Adjustable Volume Control
• Easy to Operate
• 2-Line Modular Test Lead
• Rugged Industrial design
• Water Resistant
Title |
---|
PTS100 200 DATASHEET |
Attribute Name | Attribute Value |
---|---|
PTS200 TONE GENERATOR | |
Output Power (into 600Ω) | -3dBm±3dB |
Output Frequency (nominal) | 1004Hz±100Hz |
Sweep Rate | 6Hz |
Voltage Protection (into a 600Ω Circuit) | 60VDC |
Battery | 1x9V (Not Included) |
PTS100 PROBE | |
Gain Range | 30dB |
Input Impedance: 100MΩ | 100MΩ |
Frequency Range (approx) | 500Hz - 1200Hz |
Voltage Protection (into a 600Ω Circuit) | 60VDC |
Battery | 1x9V (Not Included) |