The Omni Marker™ electronic marker provides an improved method to electronically mark and locate underground facilities. Unlike other marking devices that use only a single coil, the Omni Marker electronic marker contains three orthogonally tuned circuits. When excited by any standard marker locator, these passive circuits produce a uniform, spherical RF field in every direction. … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

DISCONTINUED The DigAlert™ Probe is designed to determine, without a physical connection, if a high-frequency signal is present on a wire pair. It will directly reproduce audio signals such as speech, base-band modems, or fax tones though its primary purpose is to output a distinctive two tone alarm if high-frequency signals (such as data) are … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

DISCONTINUED The Uni Marker™ electronic markers provide an improved method to electronically mark and locate underground facilities. Each Uni Marker™ electronic marker contains a single precision tuned circuit. When excited by any standard marker locator, these passive circuits produce a response, above and below the coil which can be detected at up to 1.5 m … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

DISCONTINUED This unit identifies connector and cable pin-out with true cable mapping for both patch cords and installed cables. It also performs full-range continuity testing, line condition, signal tracing, and wire identification. RJ45 LAN cable-check mode is a true cable-mapper that identifies: open, crossed, and shorted connections.

DISCONTINUED This universal unit tests cable connectivity and maps, detects good connections, opens, shorts or crosses. It works with over 20 types of modern and legacy cables including: LAN and telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, and FireWire.

DISCONTINUED REPLACED BY PRECISION TONE GENERATOR The TEMPO Communications Precision Tone Generator (Model 177) is portable, battery-operated, and designed for use in fault location and pair identification operations. This unit is very useful when toning in high circuit noise or power influenced areas. The 577.5 Hz tone can be easily detected, while other tones cannot, … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

DISCONTINUED This kit contains an assortment of cable slitters, strippers, and Kevlar cutters to prepare fiber optic cable; it includes our 1600 Series premium crimper with interchangeable dies.

To better satisfy the alarm installation industry requirements, we have combined the Model PE620 Loop Verifier with the popular Model 200EP Inductive Amplifier in this convenient Security and Alarm kit. Designed specifically for the security and alarm industry, the PE 620 can be connected to a Normally Open or Normally Closed loop pair and provides … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

The 5680-FC Signlemode Fiber Optic Test Set XL fiberTOOLS™ are designed for the professional to perform installation and maintenance measurements on fiber optic cabling networks. The instrument family consists of individual devices (optical power meters, 850/1300nm LED sources, 1310/1550nm Laser sources, Visual Fault Locator) and complete Insertion Loss Test Sets. The XL fiberTOOLS™ are designed … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

DISCONTINUED* If your job is to find faults on coaxial cable, the Tempo CableScout® TV90 is built for you. Designed specifically for CATV and other coaxial cable applications, the TV90 applies the newest technology to provide both ease of use and coaxial cable testing performance not found in any other TDR. With the TV90, you’ll … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

The OTDR is an easy to use, full-featured handheld test instrument that is capable of measuring the length to a fault or the length of singlemode fiber optic cables. The 930XC also measures the reflectance and insertion loss of reflective and non-reflective events. The easy to learn user interface shortens the learning curve so that … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>

DISCONTINUED The 910CL cleaver provides fast and accurate cleaves for use in the 910FS splicer. The fiber adapters supplied with the 910FS fusion splicer securely hold the fiber during both the cleaving and splicing processes, which minimizes the possibility of fiber damage. The 910CL can be modified for standalone operation with the optional fixed clamp … <a href="https://www.tempocom.com/products/discontinued-omni-markers/">Continued</a>