Cat No: T28010-APC
This triple laser source is a general purpose test source for single mode systems with an APC connector, at 1310-1550-1625 nm. Typical applications include fiber optic attenuation measurement, polarity testing and fiber identification on critical systems.
Attribute Name | Attribute Value |
---|---|
Output wavelength | Port 1: 1310, 1550, 1625 nm Laser APC |
Output power | -3 dBm ±1 dB (@ 9/125 µm) |
Adjust output power | Adjustable over 7 dB in 0.01 dB steps |
Short term stability (for 15 min, typical ±2 °C, after warm up, ORL < -25 dB) | 0.04 dB (for 1310, 1550 nm) / 0.06 dB (for 1625 nm) |
Stability over temperature | 0.6 dB (typical) |
Wavelength initial tolerance (@ 25 °C) | 20 nm |
Spectrum width (FWHM) | 3 nm (typical) |
Wavelength drift | 0.4 nm per °C (typical) |
Reconnection repeatability (95% confidence) | 0.1 dB |
Calibration validity (ISO/IEC 17025) | 3 years |
Modulated output | 270 Hz, 1 kHz, 2 kHz ± 2 %, 12 Multi-Fiber ID tones |
Autotest (not available for 470, 540 nm LED sources) | Compatible with KI Autotest power meter port & matching λ |
Power | Battery / External power via USB |
Battery types | 2x AA (LR6) Alkaline / 2x AA NiMH AA (rechargeable via USB) |
Battery life | Laser/LED source: 90/80 hours in Autotest, typical |
Auto off | Selectable |
Case | Polycarbonate (body) / rubber (edges & corners), moisture resistance, 1-meter drop tested |
Size | 190 mm x 105 mm x 35 mm |
Unit weight | 0.42 kg |
Shipping weight | 1.5 Kg |
Operating / storage temperature | -15 to 55 °C / -25 to 70 °C |
Relative humidity | 0 ~ 95 % |
Warranty | 3 years |