Ultra-Stable 2W Loss Length ORL Tester, T23422OLV
Cat No: T23422OLV
A Two-Way Optical Loss Test set (OLTS) that’s perfect for medium to ultra high fiber count loss, length and optical return loss testing applications on single mode fiber at 1310 / 1550 nm. A pair of these compact instruments set new standards of productivity, accuracy and ease of use. The 650 nm VFL Visitester feature mixes a VFL in with the test signal during Autotest. In addition to operating as a typical VFL, it gives positive visual identification of a fiber to be connected for loss testing.
Each SM fiber needs just one test hook-up and one key press for a complete 2W / bidirectional loss, length & ORL test, eliminating administration, training and test errors. Testing is accurate and can take only 5 seconds, direct onto flexible standards-compliant Tier 1 certification reports.
A pair of instruments both display length bi-directional loss, & ORL fiber testing each end, in real time, with no need to specify master/slave instruments. A single instrument can also be used as a stand-alone ultra-stable light source & power meter, VFL, ORL meter, or tone generator / detector.
ORL sensitivity on this model is typically adequate for installed cable testing, but is limited by the PC connector. For best ORL sensitivity, select a model with an APC connector.
Dual Optical Loss Test Set + VisiTester, T27622
- 25% of the size / weight, 7x the battery life of competitors
- Bidirectional Autotest loss, length & ORL testing on one fiber
- Full-feature optical return loss tester
- Real time Pass / Fail display
- 8,000 fiber memory and USB key file dump
- KITS™ reporting software (download)
- Autotest optical power meter, >25 λ, 1 % accuracy
- Traceable reports: source stability & λ, meter cal & linearity, ORL cal
- 80 hr alkaline battery life
- 3 Year warranty and calibration cycle
| Attribute Name | Attribute Value |
|---|---|
| Modulated output (source) | 270 Hz, 1 kHz, 2 kHz ± 2 %, 12 Multi-Fiber ID tones |
| Output wavelength (source) | 1310-1550 nm Laser, VisiTester |
| Output power (source) | -7 dBm ±1 dB @ SMF |
| Adjust output power (source) | Adjustable over 7 dB in 0.01 dB steps |
| Short term stability for 15 min, typical ±2 °C, after warm up, ORL < -25 dB (source) | 0.03 dB |
| Stability over temperature (source) | 0.2 dB (max) |
| Wavelength drift (source) | 0.4 nm per °C (typical) |
| Wavelength initial tolerance @ 25 °C (source) | 20 nm |
| Spectrum width @ FWHM (source) | 3 nm (typical) |
| Reconnection repeatability @ 95% confidence (source) | 0.1 dB |
| Length range (2-way Autotest only) | 27 dB |
| Length accuracy (2-way Autotest only) | 0.01% ± 4 meters |
| Length resolutions | 1 meter (0.000~9.999 Km), 10 meters (10.00~99.99 Km), 100 meters (100.0~127.9 Km) |
| Loss range (2-way Autotest) | 44 dB |
| Loss repeatability & loss linearity (2-way Autotest) | 0.04 dB |
| Loss range (1-way Autotest) | 44 dB |
| Loss repeatability & loss linearity (1-way Autotest) | 0.04 dB |
| ORL range | 0 ~ >60 dB |
| ORL port isolation | > 60 dB |
| ORL accuracy | 0.2 dB |
| ORL resolution | 0.01 dB (@ 0 ~ 50 dB), 0.1 dB (@ 50 ~ 65 dB) |
| VisiTester wavelength | 650 ± 5 nm |
| VisiTester power | 0 dBm ± 1 dB @ SMF |
| VisiTester laser safety | Class 1, IEC60825-2 |
| VisiTester blink rate (manual) | CW or 2 Hz |
| Detector type (meter) | InGaAs |
| Response wavelength (meter) | 600 ~ 1700 nm |
| Calibration wavelengths (meter) | 780, 820, 850, 980, 1270, 1290, 1300, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610, 1625, 1650 nm |
| Accuracy (meter) | 1 % (0.06 dB) |
| Mid-range linearity (meter) | 0.04 dB (typical) |
| Power range (meter) | +10 ~ -60 dBm (780 ~ 980, 1590 ~ 1650 nm) / +10 ~ -70 dBm (1270 ~ 1650 nm) |
| Total uncertainty (meter) | 0.3 dB (max) |
| Resolution (meter) | 0.01 dB |
| Polarization sensitivity (meter) | < 0.05 dB (typical) |
| ID tone detection & Autotest sensitivity (meter) | Up to -50 dBm |
| Autotest: | 1-way: compatible with other T23400 & T27400 models / 2-way: compatible with identical model only |
| Tone detection (meter) | 150 ~ 9999 Hz ± 1 % |
| USB interfaces | USB-micro for power & software / USB-A for memory key |
| Software | KITS (free download) |
| Power | Battery / External power via USB |
| Battery life | Laser/LED source: 80 hours (typical) in Autotest, Power Meter: 1000 hours (typical) |
| Battery type | 2x AA (LR6) Alkaline / 2x AA NiMH AA (rechargeable via USB) |
| Auto off | Selectable |
| Display | 74 mm x 55 mm high contrast LCD |
| Case | Polycarbonate (body) / rubber (edges & corners), moisture resistance, 1-meter drop tested |
| Memory | For 8,000 fibers / Unlimited on USB |
| Size | 190 mm x 105 mm x 35 mm |
| Unit weight | 0.42 kg |
| Shipping weight | 1.5 Kg |
| Operating / storage temperature | -15 to 55 °C / -25 to 70 °C |
| Relative humidity | 0 ~ 95 % |
| Warranty | 3 years |
| Calibration validity (ISO/IEC 17025) | 3 years |