Home / Products / Hand Tools / MM200 Multimeter

MM200 Multimeter

Cat No: MM200

Equipped with all the measurement features you’re likely to need, the MM200 from Tempo Communications is an accurate, 6000 count, segmented, bar-graph, auto-ranging multimeter that will suit most electricians’ needs.

Built to international safety standards, the MM200 performs all the tests any electrician would want from a multimeter. Features like “BeepJack” help prevent damage when leads are attached to the wrong terminals for the type of test selected. Fully auto-ranging or manual—the choice is yours. The backlit LCD helps when testing in those awkward cupboards.

  • Volts
  • ohms
  • Current
  • Frequency
  • Continuity
  • Diode
  • Non-contact electric field detection plus relative measurements
  • Display backlight
  • Reading hold
  • CAT-IV 300V, CAT-III 600V, CAT-II 1kV
  • Supplied with silicone insulated safety leads with removable CAT-IV arc-flashguards
  • Supplied with a custom-built fabric carry case

MM200 Multimeter

MM200 Multimeter: Testing| Troubleshooting| Accuracy

Supplied with a zipper case and high-quality safety test leads:

Product Features:

  1. Fast response 24 segment “bar-graph”
  2. 6000 Count large digit LCD
  3. Core accuracy better than 0.5%
  4. Average responding AC measurements
  5. Measurements
    • Voltage (ac or dc)
    • Current (ac or dc)
    • Continuity
    • Resistance
    • Diode
    • Frequency
    • Electric Field (EF) voltage detector
ModelsUPC
MM-200
810025413408
Attribute Name Attribute Value
Display LCD (6000) and 24-segment bar graph
Polarity Automatic
Sampling Rate Numeric Display: 5 per second Bar Graph Display: 40 per second
Temperature Coefficient Nominal 0.15 x (specified accuracy) per °C below 18 °C or above 28 °C
Automatic Shut-Off After 34 minutes of inactivity
Noise Rejection Normal Mode Rejection Ratio > 60 dB at 50 Hz and 60 Hz when measuring DCV Common Mode Rejection Ratio > 60 dB from 0 Hz to 60 Hz when measuring ACV Common Mode Rejection Ratio > 100 dB at 0 Hz, 50 Hz and 60 Hz when measuring DCV
Operating Conditions 0 °C to 40 °C (32 °F to 104 °F)
Relative Humidity 80% maximum for temperatures up to 31 °C (88 °F), decreasing linearly to 50% maximum at 40 °C (104 °F)
Altitude 2000 m (6500’) maximum
Pollution Degree 2
Storage Temperature –20 °C to 60 °C (–4 °F to 140 °F)
Battery Two 1.5 V batteries (AAA, NEDA 24A or IEC LR03)
Volts & AutoCheck 1100 V DC/AC rms
mV, O, and Others: 1000 V DC/AC rms
µA and mA: 0.4A/1000V DC/AC rms, IR 30kA @ 1000V DC/AC rms; Dimension: 6 x 32 mm
A: 11A/1000V DC/AC rms, IR 20kA @ 1000V DC/AC rms; Dimension: 10 x 38 mm
V/ohms/mA/A to COM: Category II 1000V, CAT III 600V and CAT IV 300V AC & DC
E.M.C. Meets EN61326-1:2013